Tested & RatedGlobal Standards
AustralianMade & Owned
Lifetime WarrantyRegister Now
50 YearsEst. 1968
Tested & Rated
Australian
Lifetime Warranty
50 Years
Part Number - 909960
| Notes | Towing heavy trailers and caravans can place undue pressure on a vehicle, particularly on the rear axle. If the weight is not properly distributed the rear of the car tends to sag, resulting in the front wheels losing contact with the road. This loss in contact decreases steering control and breaking ability, significantly impacting safety. The added stress also causes undue wear and tear on tyres, increases fuel consumption, misaligns headlights and can cause trailers to sway – further impacting a vehicle’s performance and safety. Installing a Weight Distribution Hitch provides support, helping to redistribute the weight more evenly across the vehicle and trailer axles. The Milford Ultra Load Weight Distribution Hitch is designed and manufactured to alleviate the stress on the rear of the vehicle, resulting in a far safer towing experience. With built in features to ensure full weight distribution, hassle free reversing and quiet operation paired with a rugged and stylish powder coated finish the Milford Weight Distribution Hitch is the ultimate in correct load management. When choosing a Weight Distribution Hitch it is important to match the weight category of the hitch to your towing needs. If the weight category is too low the hitch will apply inadequate force, which results in insufficient levelling. 778708 - Replacement Locking Pin Kit for WDH Spring Bar. Max capacity without spring bars - Ball 226kgs, Trailer 2267kgs. |
| Vehicle Compatibility | Please confirm your vehicle make, model & variant is listed in the Fitment Details tab below |
(909960)
| Country | Make | Model | Chassis | Series | Year | KW | Lyt | Cyl | Drive Type | Body Type | Fuel Type | Engine | KtypeNr |
|---|
Superior DesignHiLoad / Max Lift design promotes full weight distribution
Parallel Mounted, the straight bar design results in maximum clearance and ‘Hassle Free’ reversing
Rapid adjustment with super safe, easy to lock chain lift brackets and soft grip handle.
Standard fit grease nipples to ensure quiet operation and reduced noise.Comes fully assembled for rapid mount installation.
Australian Standard 50mm 3500KG Towball included (600lb & 800lb).
Rugged Powder Coat Finish
Covered by Milford’s Lifetime Warranty*
*T&C’s Apply
All images are for illustrative purposes only and are included only as a guide to basic style. Actual product supplied may therefore differ in design and detail.
| SKU | 909960 |
| Barcode # | 9340767010173 |
| Brand | Milford |
| name | Weight Distribution Hitch 272kg/600lb |
| Shipping Weight | 34.0000kg |
| Shipping Width | 0.850m |
| Shipping Height | 0.160m |
| Shipping Length | 0.240m |
| Notes | Towing heavy trailers and caravans can place undue pressure on a vehicle, particularly on the rear axle. If the weight is not properly distributed the rear of the car tends to sag, resulting in the front wheels losing contact with the road. This loss in contact decreases steering control and breaking ability, significantly impacting safety. The added stress also causes undue wear and tear on tyres, increases fuel consumption, misaligns headlights and can cause trailers to sway – further impacting a vehicle’s performance and safety. Installing a Weight Distribution Hitch provides support, helping to redistribute the weight more evenly across the vehicle and trailer axles. The Milford Ultra Load Weight Distribution Hitch is designed and manufactured to alleviate the stress on the rear of the vehicle, resulting in a far safer towing experience. With built in features to ensure full weight distribution, hassle free reversing and quiet operation paired with a rugged and stylish powder coated finish the Milford Weight Distribution Hitch is the ultimate in correct load management. When choosing a Weight Distribution Hitch it is important to match the weight category of the hitch to your towing needs. If the weight category is too low the hitch will apply inadequate force, which results in insufficient levelling. 778708 - Replacement Locking Pin Kit for WDH Spring Bar. Max capacity without spring bars - Ball 226kgs, Trailer 2267kgs. |
Help other Milford users shop smarter by writing reviews for products you have purchased.
