Skip to main content
image Tested & Rated
Global Standards
image Australian
Made & Owned
image Lifetime Warranty
Register Now
image 50 Years
Est. 1968
 Search By Vehicle
The Perfect Connection 
Milford design and develop vehicle specific wiring harness kits right here in Australia. 
Every application is carefully considered and thoroughly tested so as to fully comply with all vehicle functions including Trailer Stability Programming (TSP), Lane Collision Avoidance systems, Park Distance Controls (PDC) and of course, conventional requirements such as brake lights, turning signals and live wire connection. 
With standard elements such as Milspec / OE style plugs, pre-programmed ECU’s, C2 failure mode, CANbus technology and complete plug and play convenience, in many instances the Milford Wiring Harness Kit far exceeds OEM offerings; making it a valuable addition to each towing package.


CountryMakeModelChassisSeriesYearKWLytCylDrive TypeBody TypeFuel TypeEngineKtypeNr
Australia MITSUBISHI PAJERO SPORT QE 2.4 DI-D 4x4 (KS1W) 08/2015-On 133 2.4 4 All-wheel Drive Closed Off-Road Vehicle Diesel 4N15 116340
Australia MITSUBISHI PAJERO SPORT QE, QF 2.4 DI-D 4x4 (KS1W) 08/2015-On 133 2.4 4 All-wheel Drive Closed Off-Road Vehicle Diesel 4N15 116340

The Ult1Mate Connection

Superior OE Compatible Quality & Design

Compatible with PDS, LED Lighting Systems, Trailer Stability Programs & CANbus Systems

Power Accessory Pickup -12v Live Wire and Electric Brake Pickup Pre Wired in Harness

C2 Trailer Globe Failure Sensor Warning

Vehicle Specific Design

Covered by Milford’s Lifetime Warranty*

*T&C’s Apply

All images are for illustrative purposes only and are included only as a guide to basic style. Actual product supplied may therefore differ in design and detail.

SKU MT-121-B4M
Barcode # 8717323063200
Brand Milford
Name Towbar Wiring Harness Kit
Fitting Time (min) 60
Body Type Commercial Vehicle
Bumper Removal Required Yes
Drilling Required Yes
C2 Enabled Yes
C2 Recode Required No
PDC Cutoff Yes
Trailer Harness Signal Type Kit Type - Analog
Shipping Weight 0.9000kg
Shipping Width 0.290m
Shipping Height 0.095m
Shipping Length 0.215m

Great DIY fitment at home

28 June 2019
I fitted this along with the Milford tow bar. Great design and plug and play fitment. I didn't need to drill any holes in my MY18 vehicle- they were already there- and the harness grommet fit perfectly. No need to run wiring to the front of the car either as it uses all the OEM tie in points. Just some small jumper harnesses. Very pleased.

Write a product review

More From This Category